“We would like nothing better than to have future opportunities that allow us to   further explore the rich and infinite field of possibilities inherent in the medium   of brick sculpture, along with the incorporation of other media such as stainless   steel, water features, fiber optics, glass, concrete, etc.”     HOW WE DO IT We begin with the design, which is arrived at by working closely with the client’s basic ideas. Once a design has been worked out and accepted or approved, we then go through the process of working with the brick manufacturer to order the desired size and depth of wet clay brick, or “green ware”. We then stack up the "green ware" on an easel and begin sculpting the design by reduction carving. After the sculpting is finished, it is disassembled and readied for the drying and firing process. After the brick manufacturer has fired the mural, it is reorganized and "dry stacked" back on the easel to make sure everything is accounted for. Then it is then carefully packed on pallets with cardboard padding between each and every brick, delivered to the job site, and taken through the final process of the installation...every aspect of the project being carefully attended to and handled in the most professional manner possible.